GreatBulk.com Blog

2012年2月21日星期二

LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor

New Arrival! LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2845 KV2960 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 4s
Max. Power: 390W
Rotational Speed: 2960KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2845 KV4420 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 30A
Lipo Cell: 2 - 3s
Max. Power: 390W
Rotational Speed: 4420KV
Mounting Hole Depth: 5mm
Shaft Diameter: 3.175mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 45mm
Weight: 115g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2850 KV2950 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 48A
Lipo Cell: 2 - 5s
Max. Power: 1000W
Rotational Speed: 2950KV
Mounting Hole Depth: 5mm
Shaft Diameter: 4mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 50mm
Weight: 145g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! LEOPARD RC Model 2850 KV3580 4 Poles R/C Hobby Inrunner Brushless Motor

LEOPARD RC Model 2850 KV3580 4 Poles R/C Hobby Inrunner Brushless Motor
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

escr>Specifications
Max. Current: 60A
Lipo Cell: 2 - 4s
Max. Power: 1000W
Rotational Speed: 3580KV
Mounting Hole Depth: 5mm
Shaft Diameter: 4mm
Shaft Length: 12mm
Dimensions (Diameter x Length): 28mm x 50mm
Weight: 145g
Suitable Model: RC Car / Boat

Features
- High Efficiency
- Handwound
- Neodym Magnets
- Long Service Life
- Low Electromagnetic Interference
- 12 Slot Stator
- Precision Ball Bearings For Smooth Operation
- Minimal Motor Maintenance Required
- Low Current

New Arrival! SKYA RC Model Helicopter Pitch Gauge Blades Adjuster

SKYA RC Model Helicopter Pitch Gauge Blades Adjuster
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Dimensions: 180mm x 85mm x 20mm
Material: Plastic
Net Weight: 65g

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Swanghobby Airplane Model 40mm Plastic Spinner, Yellow USD2.80 only
Rambler EP Electric Plane Kit USD75.60 only
TAMIYA 74004 Straight Tweezers USD4.20 only
RC-Tools S80 Toolbox (Helicopter) USD22.50 only
SWANGHOBBY 4 Arms Aluminum Servo Horn USD3.80 only
XERUN Sensored 3672SD Motor & 120A ESC + LCD Card USD192.50 only
OS Engine Glow Plug No.7 4pcs Set USD27.74 only
Hobbywing Platinum 100A Electric Speed Controller USD72.90 only
OS Engine Glow Plug Type F USD8.00 only
SPRINGRC G61 2.4GHz 6ch Transmitter Receiver M2 USD56.50 only
SCORPION 1131Kv 22mm Outrunner Brushless Motor USD42.90 only
Rocky 160 Lumens Q4 CREE LED Flashlight USD12.90 only
APC 14 x 12 Nitro Composite Propeller USD16.80 only
HobbyHot Dustproof Aluminum 129mm Shock Damper (2pcs) USD9.40 only
Walkera HM-LA2-Z-17 Screw Set USD3.10 only
OS Engine Glow Plug P8 USD9.99 only
LEOPARD 2040 12T KV4800 2 Poles Brushless Motor USD21.90 only
Flyermate Aviation Power Lights Simulated LED System (Helicopter & Airplane) USD10.90 only
Walkera HM-5#10-Z-26 Receiver USD30.70 only
Walkera HM-4#3B-Z-26 Main Motor USD4.70 only

2011年1月12日星期三

New Arrival! HOBBY HOT Ship 76x49mm Water Stabilizer Boat Trim Tab

New Arrival! HOBBY HOT Ship 76x49mm Water Stabilizer Boat Trim Tab

HOBBY HOT Ship 76x49mm Water Stabilizer Boat Trim Tab
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 76mm x 49mm x 19mm
Material: Stainless Steel
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 58x47mm Water Stabilizer Boat Trim Tab

HOBBY HOT Ship 58x47mm Water Stabilizer Boat Trim Tab
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 58mm x 47mm x 15mm
Material: Stainless Steel
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 38x32mm Water Stabilizer Boat Trim Tab

HOBBY HOT Ship 38x32mm Water Stabilizer Boat Trim Tab
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 38mm x 32mm x 11.5mm
Material: Stainless Steel
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 85mm Water Stabilizer Boat Trim Fin

HOBBY HOT Ship 85mm Water Stabilizer Boat Trim Fin
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 85mm x 37mm x 28mm
Arm Length: 10.5mm, 23mm
Material: Aluminium
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 68mm Water Stabilizer Boat Trim Fin

HOBBY HOT Ship 68mm Water Stabilizer Boat Trim Fin
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 68mm x 29.5mm x 22.5mm
Arm Length: 9.5mm, 19.5mm
Material: Aluminium
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 55mm Water Stabilizer Boat Trim Fin

HOBBY HOT Ship 55mm Water Stabilizer Boat Trim Fin
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Dimension: 55mm x 23.5mm x 19.5mm
Arm Length: 7.5mm, 15mm
Material: Aluminium
* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBY HOT Ship 40mm Water Stabilizer Boat Trim Fin

HOBBY HOT Ship 40mm Water Stabilizer Boat Trim Fin
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Dimension: 40mm x 16.5mm x 12.5mm
Arm Length: 5mm, 11mm
Material: Aluminium
* All of the above information and pictures are reference only. Color may be changed.

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
JXD RC 3ch Blue Gyro LED Mini Helicopter RTF USD18.90 only
Flyermate 25A Electric Brushless Speed Controller (1/18, 1/16) USD30.70 only
Hot Leopard Helicopter USD27.90 only
Walkera HM-5#10-Z-29 Charger USD4.30 only
Tail Servo Holder USD4.90 only
Flyermate 1985W 320KV 80A Brushless Motor USD41.90 only
CX450-01-03 Metal Flybar Sesaw Holder USD9.50 only
Swanghobby 76mm 3-Blades Ducted Fan + 80A 5A BEC Electric Speed Controller USD56.97 only
Main frame USD6.90 only
CX450-01-12 Linkage Rod Set USD7.10 only
Corona 5V 6V / 5A Max 7A Lowest RF Noise UBEC BEC USD11.30 only
MiLi Power Pack 2000mAh External Battery for iPhone 3Gs 3G 2G USD44.90 only
Flyermate 450 Class B18 Glass Fiber Cabin Canopy USD5.90 only
CX450-02-02 Metal Tail Holder Set USD25.20 only
charger USD9.90 only
Hobbywing Seaking-35A Brushless Electric Speed Controller USD31.90 only
AEE Tiny Voice-activated Video Camera USD101.40 only
Esky EK2-0907 Servo Tester / Adjuster USD5.90 only
Futaba TM-8 8-Channel 2.4GHz FASST Module 9C/9Z/8U/7U USD147.70 only
APC Thin E 10 x 7 Electric RC Airplane Composite Propeller USD3.80 only

2011年1月11日星期二

Tamiya WW2 German Infantryman 1/16 Figure 36304

New Arrival! Tamiya WW2 German Infantryman 1/16 Figure 36304

Tamiya WW2 German Infantryman 1/16 Figure 36304
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:16
Material Plastic

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya WW2 German Machine Gunner 1/16 Figure 36306

Tamiya WW2 German Machine Gunner 1/16 Figure 36306
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:16
Material Plastic

About the WW2 German Machine Gunner
Finely sculpted figure wears late-WWII greatcoat and totes powerful MG42 Machine Gun. Realistic greatcoat is assembled from three parts and topped of with a separately molded collar piece. MG42 Machine Gun equipped with cover and ammunition drum. Gun composed from 9 realistically recreated parts including two types of support stand.

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya Military 1/35 HORCH 4x4 TYPE1a KRAFT-WAGEN 35052

Tamiya Military 1/35 HORCH 4x4 TYPE1a KRAFT-WAGEN 35052
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic

About the HORCH 4x4 TYPE1a KRAFT-WAGEN
As the Reichswehr of the 1920`s was very much limited both in size and scope by the terms of the Versailles Treaty, and as the economic situation did not, in any case, allow lavish spending on equipment, most of the transport needs of the army were met by using adapted commercial vehicles. Most widely used of all vehicle types, because they were cheap and very mobile, were personnel carriers based on commercial car chassis fitted with a simple open body of the type known as the Kubelsitzer (literally "bucket-seater"). This type of vehicle, as the name implies, consisted of little more than the chassis and normal front end, as in the normal motor car, with sturdy metal backed seats secured to the chassis frames. Folding canvas screens took the place of doors, and there was a canvas cover, as in a sports car, to be erected in foul weather. Though cross-country performance was very limited, the style of the vehicle was something of a trend setter and small utility personnel carriers have since become common equipment in all armies.

To improve on cross country ability, these early "Kubelwagens" had large section tyres, strengthened springs, and lower axle ratios than their commercial equivalents. During the 1930`s, this type of vehicle saw ever wider use with the German army and was one of its most characteristic and distinctive types. These "Kubelwagens" were used as light gun tractors, staff cars, radio cars, command cars, artillery survey vehicles, and signal line layers, as well as serving as personnel carriers for motorized units. Trials held in 1930 had established that the car chassis made by Daimler-Benz, Adler and Wanderer were the best, and these makes predominated in service.

From 1933, when the National Socialist took power and began overt re-armament of the German forces, there was an expansion on an increasing scale with mechanisation of the greatly enlaged army among priority schemes. At that time the various cars on adapted commercial chassis were categorised as follows: Leichte Personnenkraftwagen (light passenger car) approved makeup to 1500cc engine capacity. Mittlerer Personenkraftwagen (medium passenger car) approved make up to 3,000cc engine capacity. Schwerer Personenkraftwagen (heavy passenger car) approved make up to 3,000cc engine capacity.

The light passenger car types were each given a designation according to their intended purpose. Thus Kfz (kraftfahrzeug) 1 was the designation for the basic light personnel carrier; Kfz 2 designated a light signals car (Kraftkahrzeug motor vehicle). The medium vehicles were designated similaryly from Kfz 11 upwards according to function. In the heavy class only the Kfz 21 heavy cross country personnel carrier was produced, as this was the last type to be approved and ordered. It entered service in 1937 and was based on the Auto-Union/Horch EFm chassis, remaining in production until 1940 (after Austria was annexed, the Steyr 1500A was also built to this "heavy" requirement, however also designated Kfz 21). The Auto-Union/Horch EFm model had a V-8 80 hp engine and four wheel drive. Because of its length it had three rows of two seats, seating six men in all. Spare wheels were carried on the side panels flanking the first and second rows of seats. The ordinary commercial tourer car on which the military "kubelwagen" a senior officer`s staff car. The Kfz 21 was described in German as the "Schwerer gelandegangiger personenkraftwagen (6-sitzer)" heavy cross country passenger car (6 seater). It had the normal sort of open Kubelsitzer body and a folding canvas top. Overall length was 15 ft 11 inches.

The `Einheits` Programme

One of the problems presented by the original policy of purchasing commercially based vehicles was the vast diversity of makes taken on to the inventory, and the associated maintenance and spares supply problem. Different makes of engine, transmission, chassis, and so on meant that the stock of spares needed was immense. Thus, once the big armament programme got under way, it was decided in 1934 to replace the range of commercially based chassis with a new range of standardised chassis types. It was intended that the three classes of field car, light, medium, and heavy, would have many parts in common, including suspension units, and that the light and heavy cars would have steerable wheels at the front and back, and would have four wheel drive. This proved to be too ambitious an ideal, even from the start, for the cost and time factor involved in developing such a sophisticated series of vehicles was immense. Only the early vehicles had rear wheel steering, and this requirement was dropped in 1940 to simplify production. Auto-Union/Horch were the main builders of both the medium and heavy passenger cars in the Einheits programme (einheitsfahrgestell: standard motor chassis). The Auto Union/Horch Chassis I for heavy passenger cars (schwerer personenkraftwagen)was produced in 1935. As part of the overall plan it was intended to use this chassis with a rear mounted engine for armoured cars and with a front mounted engine for passenger cars. The original chassis with steerable wheels front and back was designated I a, and the later production chassis (from 1939-40) was designated I b. The chassis featured four wheel drive. There was a torque converter with a limited differential action to prevent winding up in the transmission. The front axle was driven directly from the main gearbox, which included a third differential. There were five forward gear ratios, one reverse, and an auxiliary low gear for cross country work. There was a self locking differential on the rear axle with a normal differential at the front, this arrangement ensuring that all wheels received driving power no matter what the nature of the terrain. There was fully independent suspension, each wheel having two radius arms sprung by two coil springs between the power radius arm and a bracket on the chassis frmae. Shock absorbers were incorporated into the suspension to prevent damage to the steering arms. The four wheel steering facilty proved to be unsatisfactory in the long term. The rear wheel steering was optional, controlled by a dog clutch operated by a lever from the driving position. Using four wheel steering and driving fast, the vehicle was found to slew sideways; thus it was not popular and after some experience four wheel steering was forbidden altogether at speeds over 13 mph. This limitation made the whole facility of such slight value that it was dropeed entirely from the 1940 onward production chassis.

Field car production with tis chassis started late in 1938. Externally all Auto-Union/Horch heavy cars looked alike irrespective of actual chassis model, however. By 1940 the chassis had been simplified considerably, and the Berlin Ford factory was also by then engaged in production. Ford built vehicles had a Ford 3.6 litre V-8 78 hp engine in place of the Horch unit. The late 1940 models lacked recesses in the body and chassis mounted support arms for spare wheels. Production ceased in 1941 in favour of a new scheme under the Schell-Programm which sought to rationalise car production completely. In this scheme the heavy car shared the chassis of the 1.5 ton light truck. Auto-Union/Horch heavy cars remained in service throughout World War 2, however, and were among the most common of German vehicles on every front. The Auto-Union/Horch on the heavy passenger car chassis was used in several roles, and though the layout of the open body followed the old Kubelsitzer idea, all but the very earliest had the added refinement of metal side doors rather than canvas side screens. The following were among the types based on this chassis: Fernsprechkraftwagen (Kfz 23) Telephone Truck. Leichter Scheinwerferkraftwagen I (Kfz 83) Light Searchlight Truck I Leichter Scheinwerferkraftwagen II (Kfz 83) Light Searchlight Truck II Protzkraftwagen (Kfz 59: Limber (or towing) Vehicle for Light Guns. Mannschaftskraftwagen (Kfz 81): Light AA Vehicle (some with 2 cm Flak Gun mounted) All the above had the open body but differed in function and, in some cased, internal stowage and equipment. In addition, the following were built on the chassis: Sanitaetskraftwagen (Kfz 31): Ambulance Verstarkerfraftwagen (Kfz 24): Maintenance Truck Both of these had a closed van type body.

Typical Date

Length overall: 4850mm Width overall: 2000 mm Height overall: 2040 mm Ground Clearance: 250 mm Track: 1646 mm Wheelbase: 3000 mm Fording depth: 550 mm Gross Weight: 4800 KGs Net Weight: 3600 KGs Payload: 1200 KGs Seating: 6 men, including driver Engine: Auto-Union/Horch V-8, 3,823 cc of 81 bhp at 3,600 rpm Fuel: 120 Litres Range: Road 400 km Cross country 300km

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya Military 1/35 German Destroyer MARDER III 35248

Tamiya Military 1/35 German Destroyer MARDER III 35248
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic

About the German Destroyer MARDER III
In the summer of 1941, Germany`s invasion of Russia was unfolding favorably for the Wehrmacht. However, German authorities began to notice the inferiority of their tanks and anti-tank weaponry to those of the Soviet army, such as the T34. To cope with this disparity they decided to: improve the Pz.Kpfw.III and Pz.Kpfw.IV tanks; develop new tanks; and increase production of the 7.5cm anti-tank cannon. Finally, as an interim solution, it was decided to improved captured Russian 7.62cm anti-tank cannons and deploy them for Wehrmacht use. These fearsome cannons could penetrate 83mm armor plating at a range of 1000m, but after improvement, could penetrate up to 122mm, and were renamed 7.62cm Pak36(r) gun. Until the new tanks were ready for deployment, 7.62cm Pak36(r) guns were to be mounted on the chassis of obsolete Pz.Kpfw.II and Pz.Kpfw.38(t) tanks for the creation of a stopgap tank hunter. The 38(t) tanks were based on the LtVz.38 tank, which was developed for use by the Czech company CKD (later BMM) for the Czech army in 1938. In 1939, with the annexation of Czechoslovakia, this tank went into production for the Wehrmacht. The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r) gun, resulting in the creation the Wehrmacht`s fearsome tank hunter, the Marder III Sd.Kfz.139. The turret base of the Pk.Kpfw.38(t) was removed and a 16mm steel plate was attached in its place. The Soviet 7.62cm Pak36(r) gun was mounted on that plate, 11mm armor plating installed to the front and sides, and massive stirrups immobilized the gun.

Features
1/35 scale plastic assembly model kit based on the German Tank Destroyer Marder III.

Overall length: 174mm

Each detail of this fascinating fighting machine has been accurately reproduced for total modeling satisfaction.

All the details of the fighting compartment (main gun plate, gun supports, ammunition rack, etc.) have been precisely recreated.

Protective armor and sighting equipment moves with raising and lowering of main gun.

Crew seats and large clamp for main gun can be modeled in the fighting or moving positions.

Two crew figures are included in set. Five kinds of battlefield markings are included.

Real Construction of Marder III Captured in Parts

The base this Czech-made tank was combined with the Soviet 7.62cm Pak36(r), resulting a fighting vehicle of considerable height. The base this model does not incorporate slide-molding techniques, but requires a fascinating assembly from several parts, offering the modeler with a truly pleasurable 1/35 scale construction

Cleverly Arranged Runners

Since the chassis runner is divided by panels, assembly of the Pk.Kpfw.38(t) tank base offers a deep understanding of the actual construction. Learn all the intricacies of the real Marder III through assembly of this precise scale model!

Abounding Detail

Every part of Tamiya`s Marder III has been recreated with stunning attention to detail. The ammunition rack and basket, slanted armor plating, leaf-spring suspension, large road wheels-no details have been left out!

Soviet 7.62cm Pak36(r)

The simple construction of this modified Soviet gun is beautifully illustrated on Tamiya`s Marder III. No details of the fighting compartment have been overlooked. Also, the sighting equipment and front armor plate can be raised or lowered, even after assembly.

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya Military 1/35 German Infantry Winter Gear 35256

Tamiya Military 1/35 German Infantry Winter Gear 35256
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya Military 1/35 KOMMANDEUR-WAGEN Type 1500A 35235

Tamiya Military 1/35 KOMMANDEUR-WAGEN Type 1500A 35235
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic

About the KOMMANDEUR-WAGEN Type 1500A
In the early half of World War II, the mechanized units of the German army recorded many victories by employing the "Blitzkrieg" strategy. These triumphs can be attributed to both the fighting units on the front lines and the clever strategies and know-how of the commanders. To move these high ranking commanders from place to place, various vehicles were necessary. One of those vehicles was the Kommandeurwagen, produced by the Austrian firm, Steyr. Its development was based on the military transport vehicle, Steyr 1500A/01, produced in accordance with the vehicle standardization "Schell Programme" of 1940. Developed using the chassis of a 1500A truck, the 1500A/01 housed an eight cylinder, eighty-five horse power gasoline engine, a four forward/one reverse gear transmission, a front wheel torsion bar, and a leaf spring rear suspension. The Wehrmacht, impressed with the maximum speed of 100km/h on paved roads and excellent running performance, ordered the Steyr firm to produce a modified version for command use. In contrast to the eight passenger capacity of the 1500A/01, the Steyr Kommandeurwagen, which was designed for comfort, had a capacity of only five passengers. All of the seats were leather and the fight front seat could be reclined and used as a bed. The Kommandeurwagen`s role as the wheels for the "elite" of the German army stretched from Russia to North Africa.

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

New Arrival! Tamiya Military 1/35 German STEYR Type 1500A/01 35305

Tamiya Military 1/35 German STEYR Type 1500A/01 35305
Available at www.rcecho.com - ship to worldwide
Available at www.rcecho.com - ship to worldwide

Specifications
Scale: 1:35
Material Plastic

About the German STEYR Type 1500A/01
After WWI, the German military discovered the importance of combined land and air assaults to maximize the damage of the enemy`s forces. This strategy, known as the "Blitzkrieg" strategy, amplified the need for reliable transport vehicles. The "Schell Programme" was introduced, in 1940, to increase the ease of production of land vehicles for the German Army. The Austrian-made, 1.5ton, all wheel drive, Steyr 1500A/01 was an 8 passenger vehicle used in a variety of roles such as staff car, HQ transport, artillery tow truck and ambulance. The vehicle was equipped with a front torsion bar, lead spring rear suspension, four speed transmission, air-cooled 8-cylinder 85hp engine, and had a top speed of 100km/h. Towards the end of WWII, some of the vehicles were produced with bulletproof windows, and reinforced steel plate doors.

Features

1/35 scale assembly kit set of the German Steyr Type 1500A/01 with several figures.

Includes detailed suspension and the large soft skin truck body of the popular Steyr 1500A/01.

Includes 4 infantry figures.

All four figures come wearing tropical uniforms.

3 kinds of markings included for the Steyr.

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
Esky Hobby 6ch FM 72MHz Digital Proportional Receiver USD9.90 only
AEO 4500KV Brushless Motor 55mm RC Ducted Fan EDF USD20.90 only
Tamiya Military 1/35 German Police Normandy 1944 89740 USD18.90 only
Corona Model RD820II 8ch 35MHz Dual Conversion Receiver USD13.90 only
Corona DS-538MG Metal Gear Digital Standard Servo USD13.90 only
RC Model 3.7g Airplane & Helicopter Mini Servo USD4.90 only
TEKMODEL RC Car Brushless Motor 35A ESC & Program Card USD38.90 only
Tamiya Military 1/35 German Sd.Kfz.121 Tank Model 35299 USD23.90 only
RC Smart Gold 1375 RPMV Outrunner Brushless Motor USD33.90 only
Tamiya Automotive 1/24 Ferrari 360 Spider Model 24307 USD29.90 only
Futaba S3151 Digital Servo ( Less Noise Signal ) USD34.90 only
APC Model 5.7 x 3 RC Composite Propeller USD3.90 only
Tamiya Automotive 1/24 Volkswagen 1300 Beetle 24136 USD15.90 only
RC Airplane 68x57mm 1/7 Warplane Pilot Model USD9.90 only
Tamiya Motorcycle 1/12 Kawasaki Ninja ZX-12R 14084 USD23.90 only
APC Model 14 x 10 RC Composite Propeller USD19.90 only
Futaba Servo Gear Set for S3150 Servo USD20.90 only
Futaba Aero Batics FASST 2.4GHz RC Model Sticker USD9.90 only
Tamiya Aircraft 1/700 B-25 Mitchell Bomber 77702 USD4.90 only
APC Electric 5 x 5 RC Composite Propeller USD3.90 only

New Arrival! Tamiya Motorcycle 1/12 Honda REPSOL RC211V 06 14106

New Arrival! Tamiya Motorcycle 1/12 Honda REPSOL RC211V 06 14106

Tamiya Motorcycle 1/12 Honda REPSOL RC211V 06 14106
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-repsol-rc211v-06-14106.html
Available at http://www.rcecho.com/tamiya-motorcycle-1-12-honda-repsol-rc211v-06-14106.html

Specifications
Scale: 1:12
Material Plastic

About the Honda REPSOL RC211V 06
Building on its reputation as the most successful machine in modern MotoGP history, the Honda RC211V is once again at the top of the standings, in the capable hands of the Repsol Honda Team. Consistent finishes have resulted in young riding sensation Daniel Pedrosa, one of the most talked-about riders of the 2006 season, currently holding 2nd place in the standings behind only his teammate Nicky Hayden. With the end of the season just a few races away and new regulations specifying 800cc machines for the 2007 season, Pedrosa looks to hold off other challengers to give Repsol and the Honda RC211V `06 a one-two finish to end the 990cc RC211V`s illustrious career.

Features
1/12 scale assembly model kit of the Repsol Honda RC211V`06 ridden by Daniel Pedrosa

Characteristics of the RC211V`06 such as the refined cowling, triple exhaust system, and the airbox mounted in front of the fuel tank are accurately reproduced

All new parts used for the clutch cover, fuel tank, and other sections

Cowlings can be attached/removed using tiny precision-made screws

Markings for both Daniel Pedrosa`s No.26 and teammate Nicky Hayden`s No.69 included

Because this product is incomplete model, buyers can enjoy the processes of assembling the model and figure painting. The photo is for reference only.

Remote Controlled Toys Online Shop: www.rcecho.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
RC Model Racing Ship 31x21x14mm Propeller (2pcs) USD4.90 only
Hirobo Shuttle Sceadu Evo 0412-229 Helicopter Decal USD15.90 only
RC 3300 RPM/V Outrunner Brushless Motor 70mm Ducted Fan USD21.90 only
Tamiya Motorcycle 1/12 Honda CX500 Turbo 14016 USD22.90 only
Hirobo Lepton EX 0304-020 SZM Wash-out Control Arm USD28.90 only
AXI Model GREASE High Quality Grease for Gear Box USD5.90 only
Tamiya Military 1/48 US M8 Armired Car GREYHOUND 32551 USD18.90 only
HOBBYWING 5V 6V / 3A Max 5A Low Noise UBEC BEC USD8.90 only
Futaba S9001 Coreless Motor Standard Servo USD28.90 only
Futaba Servo Gear Set for S3101 S3115 Servo USD3.90 only
Tamiya RC Model Volkswagen Golf V5 Wheels (1pair) 50783 USD5.90 only
Hirobo Turbulence D3 0414-504 RC Helicopter Decal USD9.90 only
4x OS ENGINES O.S. Glow Plug Type F (4-Stroke) USD24.90 only
Tamiya 850 Ball Bearing (Fluorine Sealed, 2pcs) 42111 USD6.90 only
RCS Model JJA 4.0mm RC Propeller Metal Adapter USD2.90 only
RCS 2700mAh 18.5V 30C LiPo Lithium Polymer Battery USD55.90 only
RC Model 450 Helicopter T450B18 Canopy Body USD7.90 only
APC Model 13.5 x 14 RC Composite Propeller USD23.90 only
APC Model 9.5 x 8 N RC Composite Propeller USD6.90 only
Tamiya Military 1/35 British Universal Carrier 35249 USD13.90 only

2010年12月31日星期五

New Arrival! Corona DS-919MG Digital Metal Gear Servos

New Arrival! Corona DS-919MG Digital Metal Gear Servos

Corona DS-919MG Digital Metal Gear Servos
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable Digital with MOSFET Drive
-Metal Gear

Specification

-Weight: 12.5g - 0.44 oz
-Size: 22.5 X 11.5 X 24.6mm (0.88" x 0.45" x 0.96")
-Torque At 4.8V: 20.8 oz in (1.5kg.cm)
-Speed At 4.8V: 0.07 sec at 60 deg
-Ball Bearing: Yes
-Metal Gears: Yes

New Arrival! CNC Aluminum 75mm Rudder with Water Pickup for Electric RC Boat (Red)

CNC Aluminum 75mm Rudder with Water Pickup for Electric RC Boat (Red)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
High quality CNC aluminum rudder with water pickup is designed for small electric rc boat.
This CNC rudder with water pickup can be installed with your water cooling ESC and water cooling brushless motor jacket. It makes more efficient for cooling.

Specification
Blade length: 75mm (2 15/16 inches)
From end to rear edge of the rudder blade: 61mm (2 3/8 inches)
All items are made of strong t-6061 CNC aluminum.

Package Content
CNC Aluminum 75mm Rudder with Water Pickup for Electric RC Boat (Red) x 1

New Arrival! CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Red)

CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Red)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

High quality CNC aluminum rudder with water pickup is designed for electric rc boat or 15-.21 nitro RC Boat.
This CNC rudder with water pickup can be installed with your water cooling ESC and water cooling brushless motor jacket. It makes more efficient for cooling.

Specification
Blade length: 95mm (3 15/16 inches)
From end to rear edge of the rudder blade: 61mm (2 3/8 inches)
All items are made of strong t-6061 CNC aluminum.

Package Content
CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Red) x 1

New Arrival! CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Silver)

CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Silver)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
High quality CNC aluminum rudder with water pickup is designed for electric rc boat or 15-.21 nitro RC Boat.
This CNC rudder with water pickup can be installed with your water cooling ESC and water cooling brushless motor jacket. It makes more efficient for cooling.

Specification
Blade length: 95mm (3 15/16 inches)
From end to rear edge of the rudder blade: 61mm (2 3/8 inches)
All items are made of strong t-6061 CNC aluminum.

Package Content
CNC Aluminum 95mm Rudder with Water Pickup for Electric RC Boat (Silver) x 1

New Arrival! Corona DS-928BB 9 Grams Digital Mini Servo

Corona DS-928BB 9 Grams Digital Mini Servo
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable Digital with MOSFET Drive
-Resin Gear

Specification
-Modulation: Digital
-Torque: 4.8V:25.0 oz-in (1.80 kg-cm)
-Speed: 4.8V:0.14 sec/60�X
-Weight: 0.32 oz (9.0 g)
-Dimensions:
Length:0.89 in (22.5 mm)
Width:0.45 in (11.5 mm)
Height:0.97 in (24.6 mm)
-Motor Type: Cored
-Gear Type: Plastic
-Rotation/Support: Single Bearing

New Arrival! Corona DS-929MG Digital Metal Gear Mini Servo

Corona DS-929MG Digital Metal Gear Mini Servo
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable Digital with MOSFET Drive
-Metal Gear

Specification
-Modulation: Digital
-Torque: 4.8V:25.0 oz-in (2.0 kg-cm)
-Speed: 4.8V:0.11 sec/60�X
-Weight: 0.44 oz (12.5 g)
-Dimensions:
Length:0.89 in (22.5 mm)
Width:0.45 in (11.5 mm)
Height:0.97 in (24.6 mm)
-Motor Type: Cored
-Gear Type: Metal
-Rotation/Support: Single Bearing

New Arrival! Corona DS-939MG Digital Metal Gear Servo

Corona DS-939MG Digital Metal Gear Servo
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable Digital with MOSFET Drive
-Metal Gear

Specification

-Modulation: Digital
-Torque: 4.8V:34.7 oz-in (2.50 kg-cm)
-Speed: 4.8V:0.14 sec/60�X
-Weight: 0.44 oz (12.5 g)
-Dimensions:
Length:0.89 in (22.5 mm)
Width:0.45 in (11.5 mm)
Height:0.97 in (24.6 mm)
-Motor Type: Cored
-Gear Type: Metal
-Rotation/Support: Single Bearing

New Arrival! Corona DS-538MG Digital Metal Gear Servo

Corona DS-538MG Digital Metal Gear Servo
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable with MOSFET Drive
-Metal Gear

Specification
-Weight: 58 Grams
-Size: 20 x 40x 38.5 mm / 0.78 x 1.57 x 1.51 inches
-Torque At 4.8V: 97 oz in / 7.0kg.cm
-Speed At 4.8V: 0.14 sec / 60 deg
-Ball Bearing: Yes
-Metal Gears: Yes

New Arrival! Corona CS-929MG Analog Metal Gear Servo

Corona CS-929MG Analog Metal Gear Servo
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Feature
-Ball Bearing
-Programmable Analog with MOSFET Drive
-Metal Gear

Specification

-Modulation: Analog
-Torque: 4.8V:19.4 oz-in (1.80 kg-cm)
-Speed: 4.8V:0.12 sec/60�X
-Weight: 0.48 oz (12.5 g)
-Dimensions:
Length:0.89 in (22.5 mm)
Width:0.45 in (11.5 mm)
Height:0.97 in (24.6 mm)
-Gear Type: Metal
-Rotation/Support: Single Bearing

New Arrival! Tamiya 53453 Model Medium-Narrow 6-Spoke Wheels (2pcs)

Tamiya 53453 Model Medium-Narrow 6-Spoke Wheels (2pcs)
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications
Dimensions (Diameter x Width) : 52 x 24mm
Material : Plastic
Recommended Model : 53412, 53433

Package Content
Tamiya Model Medium-Narrow 6-Spoke Wheels (2pcs) x 1

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
O.S.ENGINE MAX-46LA(Silver) 2 Stroke Engine USD85.50 only
Walkera HM-59DQ-Z-07 Bellcrank Set USD5.90 only
Swanghobby 83mm 6-Blades Ducted Fan + 80A 5A BEC Electric Speed Controller USD39.90 only
HOBBYHOT Infrared 3ch Blue Gyro LED Mini Helicopter RTF USD18.90 only
G.T. Power A6 Balancing Charger USD41.90 only
Walkera HM-4#3B-Z-22 Tail Motor Wire USD4.70 only
SCORPION 939Kv 22mm Outrunner Brushless Motor USD39.30 only
TAMIYA 74018 Crafr Tools Handy Craft Saw USD6.20 only
Walkera HM-4#3B-Z-10 Swashplate USD9.50 only
1700mAh Backup Battery for iPhone 3G 3Gs IPOD with Sync USD14.90 only
Walkera HM-4#3Q-Z-13 Fuselage USD12.50 only
O.S.ENGINE MAX-50SX-H Ring Hyper 2 Stroke Engine USD211.50 only
Walkera HM-38-Z-16 Small Shaft Set 2 USD8.30 only
Futaba S9257 Digital Servo USD74.50 only
HobbyHot 2-6 Cells Li-Polymer Battery LCD Tester USD12.90 only
HOBBYWING 3A Switch Mode UBEC USD8.90 only
Walkera LAMA2 4ch RTF 2.4Ghz Mini RC Helicopter USD85.00 only
Flyermate D120 HeatSink Digital Mini Servo (Blue) USD8.90 only
MASTER AIRSCREW 12 x 8 Inch Electric RC Airplane Composite Propeller USD5.70 only
MILI POWER SPRING 4 iPHONE 4 POWER PACK USD66.90 only

2010年12月16日星期四

New Arrival! HOBBYWING XERUN 3300KV 10.5T RC Sensored Motor + 60A ESC

New Arrival! HOBBYWING XERUN 3300KV 10.5T RC Sensored Motor + 60A ESC

HOBBYWING XERUN 3300KV 10.5T RC Sensored Motor + 60A ESC
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Motor Specification
Model: XERUN 10.5T Sensored Brushless Motor
Motor Dimension (Dismeter x Length): 35.8mm x 52.7mm
Shaft Dimension: (Diameter x Length): 3.14mm x 14.5mm
Rotation Speed: 3300KV

ESC Specification
Model: XERUN-60A-V2
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 60A / 360A
Resistance: 0.0006 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>5.5T (on-road), =>8.5T(off-road) (Works with 5-6 NiMH or 2S Li-Po),

=>10.5T (on-road), =>17.5T(off-road) (Works with 8-9 NiMH or 3S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V/3A Built-in BEC
Cooling Fan Working Voltage:

5V / 0.16A, max. 8V (The fan gets the power supply directly from the battery)
Suitable Model: 1/10, 1/12 on-road and off -road, 1/8, 1/10 scale rock crawler

Weight: 80g

ESC Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.

Seamlessly change to sensorless working mode when the sensor cable is broken.

Excellent start-up, acceleration and linearity features.

Built-in mode BEC has a powerful output to supply all the electronic equipments.

Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.

3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm

Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells

* All of the above information and pictures are reference only. Color may be changed.

New Arrival! HOBBYWING XERUN 9100KV Sensored Motor + 120A ESC + LCD Card

HOBBYWING XERUN 9100KV Sensored Motor + 120A ESC + LCD Card
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Motor Specification
Model: XERUN 3.5T Sensored Brushless Motor
Motor Dimension (Dismeter x Length): 35.8mm x 52.7mm
Shaft Dimension: (Diameter x Length): 3.14mm x 13mm
Rotation Speed: 9100KV

ESC Specification
Model: XERUN-120A-V2
Dimension: 43mm(L) x 36mm(W) x 33mm(H)
Cont. / Burst Current: 120A / 760A
Resistance: 0.0003 ohm
Suitable Motor: Sensored and sensorless brushless motors
=>3.5T (on-road), =>5.5T(off-road) (Works with 5-6 NiMH or 2S Li-Po),

=>5.5T (on-road), =>8.5T(off-road) (Works with 8-9 NiMH or 3S Li-Po),
Battery: 4-9 cells NiMH or 2-3 cells Li-Po
BEC Output: 5.75V/3A Built-in BEC
Cooling Fan Working Voltage:

5V / 0.16A, max. 8V (The fan gets the power supply directly from the battery)
Suitable Model: 1/10, 1/12 on-road and off -road, 1/8, 1/10 scale rock crawler

Weight: 105g

ESC Features
Compatible with all sensorless brushless motors and most of sensored brushless motors such as LRP, SpeedPassion, Novak, Etc.

Seamlessly change to sensorless working mode when the sensor cable is broken.

Excellent start-up, acceleration and linearity features.

Built-in mode BEC has a powerful output to supply all the electronic equipments.

Firmware can be updated through an USB adapter on the advanced LCD Program Box (Optional equipment).

User programmable. Easily programmed with the "SET" button on the ESC and also compatible with the digital LEDs Program Card and the advanced professional LCD Program Box.

3 running modes (Forward mode, Forward/Reverse mode, Rock Crawler mode).

4 steps of maximum reverse force adjustment.

Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.

9 start modes (Also called "Punch") from "very soft (Level 1)" to "very aggressive (Level 9)".

8 steps of timing adjustment to suitable for all brushless motors.

Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.

Program Card Specifications
Dimensions 90mm x 51mm x 17mm
Power Supply DC 4.5V to 6.0V
Suitable ESC HOBBYWING / TEKMODEL

Program Card Features and Functions
The 2 IN 1 PROFESSIONAL PROGRAM BOX is a small device to set the programmable parameters of the brushless ESC, it works in the following 2 ways:

1. Working as an individual device to set the ESC, the value of each parameter is displayed on its own LCD screen.

2. Working as an USD adapter to link the ESC with a PC, and the user can update the firmware of the ESC or set the ESC by the special application software on PC.

Program Card Programmable Items
The programmable item for the CAR ESC are:
1. Running Mode
2. Drag Brake Force
3. Low Voltage Cut-Off Threshold
4. Start Mode
5. Maximum Brake Force
6. Maximum Reverse Force
7. Initial Brake Force
8. Throttle Neutral Range
9. Timing
10. Over-Heat Protection
11. Motor Rotation
12. Lipo Cells

* All of the above information and pictures are reference only. Color may be changed.

?/P>

New Arrival! HOBBYWING XERUN 7300KV Sensored Motor + 120A ESC + LCD Card

HOBBYWING XERUN 7300KV Sensored Motor + 120A ESC + LCD Card
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Motor Specification
Model: XERUN 4.5T Sensored Brushless Motor
Motor Dimension (Dismeter x Length): 35.8mm x 52.7mm
Shaft Dimension: (Diameter x Length): 3.14mm x 13mm
Rotation Speed: 7300KV